Navigation

SMART IR Window – IW4000, 100mm (4”)

(Be the first to review this product)
CorDEX Connect Hydrogard
  • Queens Award
  • CSA
  • RUS
  • RUS

CorDEX SMART Infrared Windows are used to perform fast and safe infrared surveys of electrical equipment across all industry sectors. The IW4000 IR Window is the best of the best. When your priority is maximum flexibility and usability coupled with longevity and safety, the IW4000 100mm (4”) SMART IR Window is the obvious solution. Incorporating all of the features of the smaller versions with the benefit of even greater viewing area, the IW4000 is the ultimate IR Window solution.

CorDEX IW4000, 100mm (4”) SMART IR Infrared Window optic
  • CorDEX IW4000, 100mm (4”) SMART IR Infrared Window optic
  • IW200, 50mm (2") SMART Infrared Window image
  • IW200, 50mm (2") SMART Infrared Window image

Description

The IW Series is manufactured from industrial grade materials designed to withstand electrical arcs and certified by Underwritten Laboratories (UL) to follow the very latest IR window standards. Install the certified, IW Series SMART IR Windows to help comply with NFPA70E electrical safety guidelines and reduce the need to wear large and bulky PPE.

Take a look before you shoot with the high security, spring loaded impact cover. With IW Series, there is no need for second visual inspection windows in addition to your IR Windows, as you can confirm switch positions for lock-out tag-out compliance with the same Window as you shoot IR. Maximise your investment, don’t throw away your IR Windows when you change your equipment. The fully removable IW Series IR Windows can be used again and again, outliving the life of your equipment.

Through intelligent design and special features, the IW Series reduces the time it takes to perform inspections. With the 1/4 turn locking system and spring loaded cover it reduces your time per inspection.

The IW Series crystal lens is also protected with HYDROGARD™ advanced formula to stop environmental moisture damage allowing the windows to be used both indoor and outdoor.

Features

  • The IW Series are fully certified and tested to the following standards: UL50, UL50V and UL1558
  • Manufactured from industrial grade materials proven to withstand electric arcs
  • Efficient 1/4 turn locking system
  • Intelligent multiple identification system foreach individual window
  • Arc flash tested against a 50kA short circuit for 1 second at 11kV
  • Embedded RFID chip enables open-architecture databasing with any compatible RFID enable device
  • CorDEX CONNECT™ compatible for automatic transmission correct and reporting
  • HYDROGARD™ coated broadband optic, impervious to moisture, mild acids and alkalis – guaranteed
  • Spring loaded impact cover, automatically raises and holds during your IR scan in any orientation
  • Compatible with other SMART tools, saving you time and money

Optic and Crystal Data

  • Crystal Insert Diameter – 100mm (3.9in)
  • Viewing aperture diameter – 93mm (3.7in)
  • Viewing aperture area – 6794mm² (9.7in²)
  • Thickness – 4mm (0.16in)

Why choose our SMART Infrared Windows?

Specifications

    Optic/Crystal Data
    Crystal Insert Diameter
    100mm (3.9in)
    Viewing aperture diameter
    93mm (3.7in)
    Viewing aperture area
    6794mm² (9.79in²)
    Thickness
    4mm (0.16in)
    HYDROGARD™ Coating
    Yes
    Shortwave IR capable
    Yes
    Midwave IR capable
    Yes
    Longwave IR capable
    Yes
    Ultraviolet (UV) capable
    Yes
    Visual capable
    Yes
    Fusion capable
    Yes
    Certification
    Underwriters laboratories (UL) recognised
    Yes
    UL50
    Type 4/12
    UL746C, UL94, UL50V, UL1558
    Yes
    Sira IP65
    Yes
    General Specification
    Gaskets Maximum Temperature
    250 ̊C (482 ̊F)
    Body Maximum Temperature
    659 ̊C (1218 ̊F)
    Optic Maximum Temperature
    1400 ̊C (2552 ̊F)
    Gaskets
    Low smoke and fume (LSF) compliant silicone
    NEMA rating
    Type 4/12 (UL Third Party Certified)
    Vibration rating
    IEC60068-2-6
    Humidity rating
    IEC60068-2-3
    Warranty
    Lifetime replacement against manufacturing defects

Resources

Brochure and Product Data

IW Series Brochure774.32 kB

Reviews

There are no current reviews for this product.

Submit a Review

Select your rating:

  • This field is for validation purposes and should be left unchanged.

FAQs

Are the IR Windows lenses water soluble?

The crystal lens material is not water soluble.

However, the IW Series has a HydroGARD protective coating to help protect them from all elements. The IW Series Windows all have an IP65 rating.

Can your IW Series Windows be used with any IR camera?

YES. The IW Series Windows are designed to be used with ALL IR CAMERA’S. The only consideration is what operating environments and equipment should be used when making your inspections.

How do I change the alias name for a particular RFID tag?

  1. Ensure your UT5000 is powered on.
  2. Place UT5000 within range of RFID Tag.
  3. Press the RFID scan key [SCAN]
  4. Press setup key [SETUP]
  5. Highlight ‘tag setup’ from the list using arrow
  6. keys, then press select key [SEL]
  7. Highlight ‘edit tag alias’ from the list using
  8. arrow keys, then press select key [SEL]
  9. Highlight ‘del’ from the list using arrow keys, then press select key [SEL] until previous alias is removed. Enter required tag alias using arrow keys, pressing select key [SEL] after each digit.
  10. When required name is entered scroll to ‘accept’ and press select key [SEL]

How long is the warranty on your IR windows?

The IW Series Intelligent IR Windows are guaranteed against any manufacturing defects and for the life of the panel in which they are fitted, they are not guaranteed against damage or misuse.

Is it important to have a high transmission rate?

It is imperative to understand your IR transmission rates and wavelengths that your IR window works in. The transmission of your IR window is needed to accurately calculate your temperature correction. The IW Series Intelligent IR Windows are all individually tested in a transmission correction chamber to calculate their individual transmission rates. Using RoutePLANNIR™ or the IW Series Installation App it is possible to get these readings on site.

Is the IW Series Intelligent IR Window flame proof?

NO. Flameproof is a term used when designing hazardous area equipment. The materials used in the construction of the IW Series IR Windows are all flame retardant and certified by Underwritiers Laboratories (UL) to UL94.

Is Your IR window more accurate than the competitions?

The IW Series Intelligent IR Window on its own is not more accurate than any competitor Window. The introduction of the transmission correction data given in RoutePLANNIR™ and on the IW Series Installation App on each individual IW Series Windows allows the user to gain the exact correction data for that window and in turn giving you the user a more accurate reading.

What are the thicknesses of your lens materials?

Our standard crystal thicknesses are:

IW3000 – 2mm (0.08in)
IW4000 – 4mm (0.16in)

What effect do the windows have on the thermal image?

When taking a thermal image, the IR Windows will always absorb some of the infrared radiation emitted by your source. This is where the transmission correction is vital. Using the RoutePLANNIR™, CorDEX CONNECT™ or the IW Series Installation App (for iPhone) you can obtain your correction data quickly and easily whilst on site.

What is the range of the RFID Scanner on the TC7000 and TC7150?

The range of the RFID scanner on TC7000 and TC7150 is limited to approximately 50mm (2”) although this does also depend somewhat on the tag.

Who can install and service an IR window?

The IW Series Intelligent IR Window must be installed and serviced only by qualified electrical personnel, in accordance with local safety codes and legislation

Why is the actual transmission rate so important?

All Infrared windows transmit infrared energy at varying levels, this is known as the transmission rate. The IR Window transmission determines the amount of infrared energy the thermal imager receives and correspondingly, the temperature the camera displays to the thermographer. To be able to calculate the temperature of a component behind an IR Window there are a number of variables for the operator and camera to consider which include:

  • IR Window Transmission
  • Target Emissivity
  • Ambient/Background temperatures
  • Distance

With all of these variables and measurements taken into consideration the camera will use this data to calculate a temperature using a sophisticated algorithm. Without all of these variables it is difficult to get an accurate temperature reading from your target located inside the panel.
The IW Series Intelligent IR Windows are all individually transmission checked across the general operating range for an electrical pdm inspector (+35C – +165C). The broad calibration routine enables the IW Series IR Windows to access specific calibration maps which take into account the spectral nature of a typical IR Window transmitter.

No other IR Window manufacturer provides this level of accuracy to thermographers. For more information on IR Window transmission go to our Learning Lab section and select the “Understanding Transmission” Lab.

Will the TC7000 work only with your SMART IR Windows?

Both the TC7150 and TC7000 will “see” through any IR Window compatible with Longwave infrared imagers. The additional features associated with CorDEX CONNECT and CorDEX SMART IR Windows are an added benefit of using instruments designed as a complimenting system.

You say that TC7150 is compatible with the IW Series SMART IR Windows, what does this mean?

Both TC7000 and TC7150 have onboard 13.5Mhz RFID scanners which means that they can communicate directly with the IW Series SMART IR Windows. The SMART IR Window wirelessly responds with a unique ID code embedded in a chip within the IR Window which enables the camera to download transmission specific data for that IR Window type from the CorDEX Servers.

Once the camera has this data, it automatically tags images taken via the IR Window for later seamless correlation via CorDEX CONNECT database software. The camera also automatically enables complex on-board correction algorithms to remove the error caused by the IR Window itself.

The result, accurate measurements with no more pen and paper attempts at correlating hundreds of IR Window images with the correct location. The combination of TC7000, IW Series SMART IR Windows and CorDEX CONNECT database package takes the load and provides accurate results, every time.

Related Products

SMART IR Window – IW3000, 75mm (3”)

The IW Series is manufactured from industrial grade materials designed to withstand electrical arcs and certified by Underwritten Laboratories (UL) to follow the...

View Details
SMART Infrared Window – IW2000, 50mm (2”)

The IW Series is manufactured from industrial grade materials designed to withstand electrical arcs and certified by Underwritten Laboratories (UL) to follow the...

View Details
TC7000 ATEX & IECEx Certified Infrared Camera

You need troubleshooting tools that are rugged, reliable, efficient and accurate. Tools that can help you detect problems fast and communicate them easily...

View Details

It looks like you’ve been here before.

It looks like you’ve been to this page before. If you need any help with more information about our products or which one might be right for you please fill out your details below and we’ll get in touch as soon as possible.

  • This field is for validation purposes and should be left unchanged.

Want to organise a live demo?

Please complete the form below and one of our Customer Solution Specialists will contact you to arrange a live product demonstration.

  • This field is for validation purposes and should be left unchanged.

Need some help?

If you need some help with this product, please use the form to get in touch. We'll be happy to help.

  • This field is for validation purposes and should be left unchanged.

Find a distributor thats near to you.

CorDEX Instruments have a variety of distributors in all areas of the globe. Tell us where you are located and we'll find the distributors most suitable to you.